- 18A total: 15A charger, 3A battery saver
- Automatic operation regulates output to a single battery bank
- A patented built-in sense circuit checks battery voltage 120 times per second to compensate for voltage drop in charging wires providing quick re-charge, with no overcharge
- Battery Saver automatically disconnects auxiliary vehicle loads from the battery when the charger is energized
- Air Compressor power mode selector switch
– DC Powered full time from the vehicle battery
– AC Powered only when from battery when
vehicle plugged into shore power
- 3-year warranty on Charger
Input: 120 Vac, 50/60 Hz, 3.5 Amps Max
Input Fuse: 6 Amps, Fast Acting
Output: 12 Vdc, 15 Amps
Battery Saver: 12 Vdc, 3 Amps
Output Fuse (Recommended): 30 Amp Waterproof Circuit Breaker (Part Number: 090-0030-0)
Power Indicator: Indicates Input Power Applied
Battery Saver Overload Indicator: Indicates Battery Saver Exceeded 3 Amps
Weight: 17 lbs
Warranty: 3 Years
Please note Battery Saver Feature is not recommended for powering highly sensitive electronic loads.
The Pump Plus 1000 is a small air compressor and a completely automatic battery charger. The compressor is a standard Auto Pump. The automatic charger maintains 1 bank of batteries with a maximum output current of 15 amps. The 3 Amp Battery Saver powers accessories and removes their load from the battery whenever A.C. power is applied to the charger.
The Pump Plus 1000 charger senses the batteries in the vehicle and recharges exactly as much as required. When the batteries are fully charged, all charging stops. The state of charge of the batteries is indicated on a remotely located bar graph display whenever power is applied to the vehicle. The Battery Saver contained in the Pump Plus 1000 charger is a 3 Amp power supply with a relay to remove the accessory loads from the battery and connect them to the power supply when the charger is energized with A.C. power. This permits the charger to recharge the batteries without supplying the accessory load.
A Selector Switch is provided on the charger to operate the compressor either in D.C. mode or in A.C. mode. In either switch position, the compressor operates from the vehicle’s battery. When “D.C.” is selected, the compressor operates whenever the pressure switch senses low system pressure. This is useful when parking the vehicle away from the 110-volt input power. For those operators who wish to limit compressor operation to the times when the shoreline is connected to the vehicle, the Selector Switch should be placed in the “A.C.” position. This will operate the compressor when the A.C. power is available but shuts off the compressor when the shoreline is removed.
This charger has three remote indicator options. Option 1, is the standard, 10 Element, Single Bar Graph Display. This indicator will come with the charger unless otherwise specified. Order 091-9-12V-1000 for this option. Option 2, is the Auto Charge Deluxe Status Indicator. This indicator has a digital voltage and ampere display, a 5 segment bar graph display to indicate the output current, and 4 LED’s to show the condition of the batteries. Order 091-9-12V-1000-194A for this option. Or Option 3, is the Watertight Auto Charge Deluxe Status Center. This is the same indicator as Option 2, only the indicator is housed in a watertight bezel. The bezel is available in 6 different colors, Red, White, Blue, Yellow, Gray, and Black. Specify color choice when ordering. Order 091-9-12V-1000-194A-WT for this option.
The 12 Volt Auto Pump is a small air compressor designed to mount on vehicles with air brakes to maintain the air pressure in the air brake system while the vehicle is not in use. A pressure switch senses when the system pressure drops and starts the compressor which then runs until pressure is restored. All ball-bearing construction, lubricated for life, assures reliable operation and requires no servicing.
Shipping Cost: Calculated at Checkout MPN: 091-9-1000-CHARGER ONLY SKU: 091-9-1000-CHARGER ONLY